Mounting The Camera - Panasonic WV-CW864A Operating Instructions Manual

RS485 Setting
The 4-bit DIP switch is used for
RS485 termination.
Switch
position
BP 2
ON ON ON
Switch
position
OFF OFF OFF
Notes:
• Defaults are marked with
• BP stands for Bit Position.
• Full duplex is not available in a daisy chain
connection. (Panasonic system controllers
only)

5. Mounting the camera

(1) Aim the "START" arrow at the bent por-
tion of the leaf spring.
54
SW2
ON
1 2
4-bit DIP SW
BP 1 Function
ON Termination ON
OFF Termination OFF
BP 3 BP 4 Function
Half duplex (2 line)
Full duplex (4 line)
.
*
Bending Leaf Spring
(2) Be sure to hook the fall prevention wire
into the bracket.
3 4
*
*
(3) Fix the camera to the upper base.
Fall Prevention
Wire
• Move the camera up so that its
guide pins fit into the guide holes of
the upper base.
• Turn the camera counter-clockwise
to the end, viewed from the bottom.
• Fasten 3 screws.
X3 Screws
Upper Base
Enclosure