Panasonic WV-CW864A Operating Instructions Manual page 33

3-5 To return to the SPECIAL 1 menu without verifying the pass-
word, move the cursor to RET, and press the CAM (SET) key.
New Password
4. To change the password in step 3-3 above, move the cursor from
OK to NEW PASSWORD, and press the CAM (SET) key. The NEW
PASSWORD menu appears.
Notes:
• The NEW PASSWORD menu is accessible only after the verifi-
cation has been completed.
• The following operations for NEW PASSWORD will not affect
the ON/OFF setting for PRIVACY ZONE on the SPECIAL 1
menu.
The up-arrow mark appears indicating the first digit on the first
line.
4-1 Enter a new three-digit password in the same way as in steps
3-1 to 3-2.
4-2 The cursor moves to OK after all three digits have been
entered. Press the CAM (SET) key to move the cursor to the
first digit on the second line.
4-3 Enter the same password as the one you have entered on the
first line.
4-4 The cursor moves to OK. Press the CAM (SET) key. If the new
password is successfully entered, the screen returns to SPE-
CIAL 1.
4-5 Retry steps 4-1 to 4-4. If the first entry for the password is dif-
ferent from the second one, the screen returns to the NEW
PASSWORD? menu.
4-6 To return to the SPECIAL 1 menu without changing the pass-
word, move the cursor to RET, and press the CAM (SET) key.
Cleaning (CLEANING)
With CLEANING in the ON position, the camera's built-in electro-
mechanical contacts are cleaned at regular intervals (approx. every 7
days).
A dry contract adversely affects picture quality and motors operation.
1. Move the cursor to CLEANING and select ON or OFF by moving
the joystick to the right or left.
The factory default setting is OFF.
ON: The contacts are cleaned for approx. 1 minute. "CLEANING"
disappears when over the cleaning process is completed.
OFF: No contact cleaning.
Note: Select OFF when the camera downloads or uploads the
preset data.
34
NEW PASSWORD
** NEW PASSWORD? **
0 1 2 3 4 5 6 7 8 9
. . .
. . .
OK RESET
RET
Special 1 menu
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK OFF
CLEANING ON
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
CLEANING
CLEANING