Panasonic WV-CW864A Operating Instructions Manual page 39

Synchronization (SYNC)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to SYNC and select LL or INT by using the joy-
stick.
The factory default setting is INT.
Important Notices:
1. The priority of SYNC modes is as follows:
1. Multiplexed vertical drive (VD2) (highest priority)
2. Line-lock (LL)
3. Internal sync (INT) (lowest priority)
2. To use internal sync, select INT.
3. Whenever the vertical drive pulse (VD2) is supplied to the cam-
era, the camera sync mode is automatically switched to the multi-
plexed vertical drive pulse (VD2) regardless of the selected sync
mode.
Line-lock Sync Mode (LL)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to SYNC and select LL by using the joystick. LL
sync mode is not available when the multiplexed vertical drive
(VD2) pulse is supplied.
3. After selecting LL, press the CAM (SET) key.
The SYNC menu appears on the monitor screen.
4. Supply the video output signal of the camera to be adjusted and
the reference video output signal (for example, Camera 1) to a
dual-trace oscilloscope.
5. Set the dual-trace oscilloscope to the vertical rate and expand the
vertical sync portion on the oscilloscope.
6. Move the cursor to COARSE by using the joystick.
7. Match the vertical phases for both video output signals as closely
as possible by using the joystick. The coarse adjustment can be
incremented in steps of 22.5 degrees (16 steps) with the joystick.
Note: After the 16th step, the adjustment returns to the first step.
40
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SENS UP X2 AUTO
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SENS UP X2 AUTO
SYNC LL
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
SYNC menu
** SYNC **
V PHASE
COARSE 1(1--16)
FINE •|•••••••
- +
RET
** SYNC **
V PHASE
COARSE 1(1--16)
FINE •|•••••••
- +
RET