Biostar K8T890-A7 Manual page 63

K8T89-A7 BIOS Setup
configuration varies from the last one. If the Enabled option is chosen, the system is forced
to update ESCDs and then is automatically set to the "Disabled" mode.
The above settings will be shown on the screen only if "Manual" is chosen for the
resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides
non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is assigned to the PCI
Bus or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing "Auto(ESCD)" (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.
Choosing "Manual", the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the "Press Enter" tag, you will be directed to
a submenu that will allow you to configure the system interrupts.
configurable when "Resources Controlled By" is set to "Manual".
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
33
By
This is only