Biostar K8T890-A7 Manual page 40

K8T89-A7 BIOS Setup
Boot Seq & Floppy Setup
This item allows you to setup boot seq & Floppy.
Figure 3.1:
First/ Second/ Third/ Boot Other Device
These BIOS attempt to load the operating system from the devices in the
sequence selected in these items.
The Choices: Floppy (default), LS120, Hard Disk, SCSI, CDROM, ZIP100,
LAN, Disabled.
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Disabled (default), Enabled.
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have 40 or
80 tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled
Boot Seq & Floppy Setup
10