Biostar K8T890-A7 Manual page 45

K8T89-A7 BIOS Setup
APIC MODE
Selecting Enabled enables APIC mode reporting from the BIOS to the operating system.
The Choices: Enabled (default), Disabled
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory exceeding
64MB.
The Choices: Non-OS2 (default), OS2.
Delay for HDD (Secs)
This item allows you to select the timing of Delay for HDD
The Choices: 0 (default).
SMALL LOGO (EPA) SHOW
This item allows you to select whether the "Small Logo" shows. Enabled (default) "Small
Logo" shows when system boots up. Disabled No "Small Logo" shows when system boots
Summary Screen Show
This item allows you to enable/disable the summary screen.
system configuration and PCI device listing.
The Choices: Disabled
(default), Enabled.
15
Summary screen means