PROAIM Cinema Series Assembly Manual page 2

Dolly Track Setup

Unfold the track from its stored position.
Open the foldable rods of track set and
tighten the screw to secure it.

Attach the track set to the joiners of the end
foot and tighten the screw properly with an
allen key so that there is a minimum gap at
the joiner.
NOTE: Repeat the above steps to attach all the
sections.

Attach the end stoppers to prevent falling of
your dolly from the track.
YOUR PROAIM 16FT HEAVY DUTY CAMERA DOLLY TRACK
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
2