NEC UNIVERGE SV9300 Migration Manual page 19

Hide thumbs Also See for UNIVERGE SV9300:

Table of Contents

Set SV9300 Unit 01 to off-line mode and power on the system. [Required Time: About 1 minute]

[Procedure to set off-line mode]

(1) Set the SENSE switch on the CPU blade to "E" or "F".

(2) Push the RESET switch on the CPU blade.

Convert the system data file (.syd) saved by SV8300 PCPro into Scripts (including a Scenario) by using

SV9300 System Data Conversion Tool. (See the SV9300 PC Programming Manual.)

[Required Time: About 10 minutes]

[Procedure to convert system data]

(1) Select the system data file.

(2) Confirm the selected file details.

(3) Execute the system data conversion.

(4) Confirm the resulting files.

Open SV9300 PCPro and connect to the Unit 01. [Required Time: About 1 minute]

Perform the Software License Authentication and register the SV9300 Software Licenses to the Unit 01.

[Required Time: About 5 minutes]

NOTE: For the migration of SV8300 TDM blades the Hardware Migration License is required.

Perform the System data memory all clear (CM00>1:CCC) and the SRAM area all clear (CM00>02:CCC)

for the Unit 01. [Required Time: About 5 minutes]

From the [Script] menu of SV9300 PCPro, run the converted script files or scenario. (See the SV9300 PC

Programming Manual.) [Required Time: About 20 minutes]

NOTE 1: After completing all the system data settings system data backup is automatically performed.

NOTE 2: After executing the script file, the executed date and time of the PC is set to SV9300.

CHAPTER 2 MIGRATION PROCEDURE

- 13 -

Table of Contents