Page 1
Installation manual Blank plate Hager Dream Safety instructions Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, regulations, directives and safety and accident prevention directives of the country. Failure to comply with these installation instructions may result in damage to the device, fire or other hazards.
Page 2
Information for electricians Installation ç DANGER! Touching live parts can result in an electric shock. An electric shock can lead to death. Disconnect the connecting cables before working on the device and cover all live parts in the area! Preparing the device for installation Cover Notches Carefully loosen the cover on the notches with a flat-blade screwdriver.
Page 3
Assembling the cover Cover Place the cover in the correct position and snap it onto the device (3). 2-5gang frames are available for multiple combinations.