Electrolux TWL3E500 User Manual page 23

Problem
Incorrect program selection.
The filter is clogged.
Dryness Level (Trockengrad) op‐
tion was set to
The load was too large.
Unsatisfactory
drying result.
The airflow slots are clogged.
There is some dirt on the humidi‐
ty sensor in the drum.
The dryness level was not set to
the desired level.
The condenser is clogged.
The filter is not locked into posi‐
The loading
tion.
door does not
Laundry is trapped between the
close
door and the seal.
It is not possi‐ After a cycle starts it is not possi‐
ble to change ble to change the program or op‐
the program or tion.
option.
It is not possi‐ The option you tried to select is
ble to select an not available for the selected
option. An program.
acoustic signal
is emitted.
Unexpected The drying duration is calculated
duration time according to load size and
appears on the dampness.
display.
The water container is full.
A program is
inactive.
The load size is small.
The drying cy‐
cle is too short.
The laundry is too dry.
Possible cause
3)
Iron Dry .
Remedy
Select a suitable program.
2)
Clean the filter.
Change Dryness Level (Trocken‐
grad) option to a higher level.
Do not exceed the maximum
load size.
Clean the airflow slots at the bot‐
tom of the appliance.
Clean the front surface of the
drum.
Adjust the dryness level.
Clean the condenser.
Put the filter in the correct posi‐
tion.
Remove trapped items and close
the door.
Turn the tumble dryer off and on.
Change the program or option
as required.
Turn the tumble dryer off and on.
Change the program or option
as required.
This is automated - the appli‐
ance is working correctly.
Drain the water container, push
the Start/Pause button.
Select a time program. The time
value must be related to the
load. To dry one item or a small
amount of laundry we recom‐
mend short drying times.
Select an appropriate time pro‐
gram or a higher dryness level
extra dry )
(e.g.
ENGLISH 23
1)
4)
2)
2)