Panasonic WJ-SX150 Operating Instructions Manual page 114

Manual Recording
1. Enter the recorder mode (Refer to p. 116 Recorder
Mode.)
2. To start recording, press the WIDE and TELE buttons
simultaneously.
The digital disk recorder will start recording.
3. To stop the recording, press the STOP button while
holding down the SHIFT button.
WIDE
Note: Refer to WJ-HD500 Series Operating Instructions
for details and other recording modes.
Search Playback
You can search playback images using the Record List or
Thumbnail Display. Every time you press the INDEX button,
the display will change as follows.
Live image Record List
image
You can operate the Record List or Thumbnail Display by
referring to the recorder's operating instructions. In addi-
tion, the following operations from the system controllers
are also available.
Joystick to UP (D): Moves the cursor up.
Joystick to DOWN (C): Moves the cursor down.
Joystick to L (A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button: Displays the search editing area./Starts
the search after you enter the search condition.
MON(ESC)button: Cancels the search editing area and
returns to the Record List or Thumbnail Display.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
PLAY button: Starts the playback of a record pointed by
the cursor.
Note: The PLAY button is deactivated in the search editing
area.
118
ZOOM
TELE
REC
Thumbnail Display -
Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a
camera's optical zooming.
1. Enter the recorder mode (Refer to p. 116 Recorder
Mode.)
2. Press the PLAY button.
3. Press the numeric button corresponding on the desired
camera number to display the spot picture.
4. Press the CAM (SET) button.
The selected camera's picture is displayed in the spot
mode.
5. Each time the button 4 and the SHIFT button are
pressed, the zooming range are changeable as follows:
2x 4x
Live
L
F2
INDEX
RECORDER
STOP
STOP
SETUP
6. To return the zooming range to x 1, press the button 4
while holding down the SHIFT button again.
7. To return to the multiscreen display, press the button 0
while holding down the SHIFT button.
Notes:
• You can move the zoomed area on the monitor with
the joystick after Step 4.
• You can also display the still picture after step 4.
8x 1x 2x
UP
R
DOWN
GROUP SEQ TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
SEQUENCE DEF OFF DEF ON
PLAY PAUSE
MON (ESC) CAM (SET)
OSD
SHIFT MON LOCK MULTI SCREEN SEL WIPER