Running Sequence; Tour Sequence; Group Sequence - Panasonic WJ-SX150 Operating Instructions Manual

RUNNING SEQUENCE

Tour Sequence

The following functions are available if a tour sequence has
been previously configured through SETUP MENU or WJ-
SX150 Administrator Console. Any tour sequence can be
assigned to any monitors.
1. Select the desired monitor and camera. (Refer to p. 90
Monitor Selection and p. 91 Camera Selection.)
2. To select the desired tour sequence number, press the
numeric buttons.
3. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
4. Press the TOUR SEQ button to run the tour sequence in
the forward direction on the active monitor.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
STEP
RECORDER
STOP
STOP PLAY
OSD
SETUP
5. Press the PAUSE button to pause a tour sequence on
the active monitor.
The "P" sign (indicating the pause status) is displayed
at the tour sequence number on the active monitor, and
a camera number currently selected appears on the
LED display.
6. Press the PAUSE button to restart a tour sequence for-
ward from the next step that was previously paused by
pressing the PAUSE button.
7. Press the NEXT button to move the sequence one
frame to the next step from the step that was previously
paused by pressing the PAUSE button.
98
RESET
ALL RESET
CALL
TOUR SEQ PRESET
T&D CAM ID EVENT
AUX1 OFF AUX1 ON PROGRAM
STILL
PRESET
NEXT
MON STATUS ALL
AUTO PAN
EL-ZOOM AUX2 OFF AUX2 ON
PAUSE
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET) CLEAR
LOG OUT
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
8. Press the PREV button to move the sequence one
frame to the previous step from the step that was previ-
ously paused by pressing the PAUSE button.
9. Press the STOP button to stop a tour sequence on the
active monitor and return to spot monitoring.

Group Sequence

The following function is available only if a group sequence
has been previously established in WJ-SX150 Administrator
Console.
As described earlier, a group sequence determines the
assignment of monitors and cameras. Therefore, monitor
selection is not required.
1. Press the numeric buttons to select a desired group
sequence number.
2. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
3. Press the GROUP SEQ button to run a group sequence
forward on the assigned monitors.
F1 ACK RESET
CAM SETUP SUSPEND ALL RESET
F2 GROUP SEQ TOUR SEQ
REW/FF
INDEX
PREV NEXT
RECORDER STEP
STOP PAUSE
STOP PLAY PAUSE
OSD
SETUP SHIFT
4. Press the PAUSE, NEXT or PREV button to operate the
group sequence. Refer to steps 5 to 8 of Tour
Sequence in this page for how to use these buttons.
5. To stop the sequence, select one of the monitors that
are being run on the selected group sequence, then
press the STOP button.
CALL
PRESET
T&D CAM ID EVENT
PROGRAM
AUX1 OFF AUX1 ON
STILL
PRESET
MON STATUS ALL
AUTO PAN
AUX2 OFF AUX2 ON
EL-ZOOM
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
SEQUENCE
MON (ESC) CAM (SET) CLEAR
MON LOCK WIPER LOG OUT
MULTI SCREEN SEL