Wv-Cu360C System Controller (Terminal Mode) - Panasonic WJ-SX150 Operating Instructions Manual

WV-CU360C System Controller (TERMINAL MODE)

A template, on which "For Matrix Switcher (WJ-SX150)" is written, is provided with System Controller WV-CU360C. When using
the template, place it on the surface of the controller.
In these operating instructions, this template's illustrations are used for descriptions.
#8
#9
$0
$1
$3
$2
$4
$6
$5
$9
Front View
@0 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
@1 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
@2 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
@3 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
@4 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
@5 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
26
@0 @1 @2 @3
OPERATE LINK ALARM MONITOR
F1 ACK RESET
CAM SETUP SUSPEND ALL RESET
F2 GROUP SEQ TOUR SEQ
T&D
INDEX REW/FF STILL
PREV NEXT
MON STATUS
EL-ZOOM
RECORDER STEP
STOP PAUSE
ALM H
STOP PLAY PAUSE SEQUENCE
MON (ESC)
OSD
SETUP MON LOCK
SHIFT
%2 $8 %1 $7 %0 #7
@4 @5 @6 @7
CAMERA BUSY PROHIBITED
IRIS
CLOSE
AUTO IRIS
CALL
FOCUS
PRESET
CAM ID EVENT
NEAR
AUX1 OFF AUX1 ON PROGRAM
AUTO FOCUS
PRESET
ALL
ZOOM
AUTO PAN
AUX2 OFF AUX2 ON
WIDE
VLD H SYS S
CAM FUNC
REC
DEF OFF DEF ON
CAM (SET) CLEAR
LOG OUT
WIPER
MULTI SCREEN SEL
#6 #5 #4 #3 # 2 #1 #0 @ 9
@6 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
@7 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
@8 Joystick
Use this joystick to manually operate cameras, camera
site accessories and a recorder, or to move the cursor
in SETUP MENU on the active monitor screen.
UP: Up
DOWN: Down
L: Left, rewind*, backward field advance*
R: Right, fast-forward*, forward field advance*
*Available after pressing the RECORDER button while
connecting to a recorder.
@9 Iris buttons (IRIS CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
Press the CLOSE and OPEN buttons simultaneously.
The lens iris is reset to the factory default setting.
360
System Controller WV-CU C
For Matrix Switcher (WJ-SX150)
OPEN
UP
FAR
L R
TELE
DOWN
@8