Check The Unit Number Of The Extension Unit - Panasonic WJ-ND300A Installation Manual

Check the Unit Number of the Extension Unit

The unit number of the connected extension unit can be checked with the HDD access indicators on the extension unit.
D Arrows buttons C
D Arrows buttons C
D Arrows buttons C
D Arrows buttons C
D Arrows buttons C
D Arrows buttons C
1. Select "YES" when the "EXT Number Check" indication (page 33) is displayed on the LCD, and then press the [SET]
button.
The message "Wait for 30 sec" will be displayed. When the unit completed to turning off the power of the HDDs (it will take
around 30 seconds), the "EXT Unit:1" will be displayed.
2. Check the unit number of the extension unit.
When the [SET] button is pressed while the "EXT Unit:1" indication is displayed, the HDD access indicators (HDD1 - HDD4)
of the extension unit with unit number 1 will light red for around 5 seconds.
The displayed unit number can be shifted to the other unit number using the arrows button (C or D).
3. Quit the unit number check.
Display "Reboot" by pressing the arrows button (C or D), and then press the [SET] button.
The unit will restart.
[SET]
[SET]
[SET]
[SET]
The HDD access indicators (HDD1 – HDD4) of the
extension unit respective to the selected unit number
will light red (around 5 seconds)
[SET]
[SET]
[SET]
[SET]
The unit will restart.
35