Check the Network Settings
It is possible to check the following network settings.
• DHCP
• IP address
• Subnet mask
1
• Gateway*
1
• HTTP port*
To check each setting, shift the display as follows.
Note: To change the port number (PT#), press the arrows button (A or B).
• Camera port (PT#1)
• Client PC port (PT#2)
• Maintenance port (PT#3)
*1: The settings of "Gateway" and "HTTP port" can be checked by displaying the client PC port (PT#2).
DHCP
IP address
Subnet mask
Gateway
HTTP port
30
Camera port
Client PC port
OFF
OFF
192.168.0.250
192.168.1.250
255.255.255.0
255.255.255.0
192.168.1.1
–
80
Maintenance port
–
192.168.2.250
255.255.255.0
–
–
[SET]
[ESC]
C Arrows buttons D
[ESC]
C Arrows buttons D
[ESC]