Connection Between Cameras And Pcs - Panasonic WJ-ND300A Installation Manual

Connection between cameras and PCs

When connecting the unit and PCs through a hub, use a LAN cable to connect between the unit and a hub.
Cameras should also be connected through a hub using LAN cables.
Important: When connecting the unit and a PC directly without using a hub, connect them using a cross LAN cable.
Connection Example
<Connecting PCs using an ADSL line>
Internet
ADSL Line
PC
Note: When using a router, MPEG-4 images sometimes may not be displayed. Refer to the network administrator for how to
configure the settings of the router.
14
ADSL Router
HUB
PC
LAN Cable
(Not provided: 10BASE-T/100BASE-TX,
Category 5, Straight)
10/100BASE-T
2 1
EXT STORAGE
PC CAMERA
Network Cameras
HUB
SIGNAL GND
ALARM
SERIAL ALARM/CONTROL
This Unit
POWER
ON
OFF
AC IN