Advertisement
Installation Procedure
1) Switch off the mains electrical supply.
2) Remove wall flange A from luminaire housing B
by loosening screws C. Pull off terminal connec-
tor D.
A
D
3) Check that rating shown on luminaire label
conforms with mains electrical supply.
(example)
RLS420-LED
131-XXXX
LED 3000K 18W
A
C
B
05/19 IP66
120-277V / 60 Hz
SOE XXXXXXX
item no. XXX
4) Determine positions for two fixing screws E.
Drill relevant holes F and insert nylon plugs G
(not supplied by WE-EF).
ATTENTION: Ensure not to damage any electrical
cable, water pipe or other items drilling holes.
F
Fixture is intended to be mounted over a UL listed
junction box (not supplied by WE-EF), use provided
wall plate to cover boxes larger than the outer
dimensions of the luminaire.
A
G
E
Advertisement
