SECTION 5: HEATER INSTALLATION
5.1 General
Heaters are designed for floor standing vertical
installation. Special versions supplied with steel
channels to support the heater are available and
may be mounted horizontally. When installed
horizontally, the heater will normally lie on its left
side when viewed from the burner. The heater
Figure 2: Typical Installation of a Gas Fired Cabinet Heater
should be placed on a firm, level, non-combustible
surface that can support its weight. See Page 5,
Section 4.1 for weight details.
5.2 Handling
All cabinet heaters are supplied secured to a
wooden pallet and shrink wrapped. Use the pallet to
support the heater during handling and installation.
Air
Distribution
Heads
Building Ventilation
Gas Isolating Valve
Union
Connection
SECTION 5: H
Flues up to 200 mm dia. are
fitted with Bird Screens, over
200 mm with a Rain Cap.
1 m
Minimum
Lead Roof Plate
Flue
Roof
Electric Supply
I
EATER
NSTALLATION
11