TMC Aquarium V2 iLumenAir 900 Instructions For Installation And Use Manual page 9

Programming
1. Press to set the start time for your photoperiod. Press once to adjust the hour and twice to
START
adjust the minute. Use
2. Press to save your settings.
SAVE
3. Press to set the dawn phase duration. Press once to adjust the hours and twice to adjust the
minutes. Use
4. Press repeatedly to choose between the white, blue and colour mixing channel. Adjust the
brightness of each channel using
5. Press to save your settings.
SAVE
6. Press to set the sunrise phase duration. Press once to adjust the hours and twice to adjust the
minutes. Use
7. Press repeatedly to choose between the white, blue and colour mixing channel. Adjust the
brightness of each channel using
8. Press to save your settings.
SAVE
9. Press to set the daytime phase duration. Press once to adjust the hours and twice to adjust
the minutes. Use
10. Press repeatedly to choose between the white, blue and colour mixing channel. Adjust the
brightness of each channel using
11. Press to save your settings.
SAVE
12. Press to set the sunset phase duration. Press once to adjust the hours and twice to adjust the
minutes. Use
13. Press repeatedly to choose between the white, blue and colour mixing channel. Adjust the
brightness of each channel using
14. Press to save your settings.
SAVE
15. Press to set the moonlight phase duration. Press once to adjust the hours and twice to adjust
the minutes. Use
16. Press repeatedly to choose between the white, blue and colour mixing channel. Adjust the
brightness of each channel using
17. Press to save your settings.
SAVE
and to adjust up or down.
and to adjust up or down.
and
and to adjust up or down.
and
and to adjust up or down.
and
and to adjust up or down.
and
and to adjust up or down.
and
to create your preferred dawn effect.
to create your preferred sunrise effect.
to create your preferred daytime effect.
to create your preferred sunset effect.
to create your preferred moonlight effect.
7