Get Command - Pioneer PRO-1000HDI Service Manual

5

7.4.3 GET COMMAND

Command Description
Command
GAJ Outputting data for electronic-control-adjustment values and drive-system-adjustment values
GPW Outputting data related to the white-balance adjustment for the panel
GS1 Outputting data such as version information, and data from the hour meter and pulse meter
GS2 Outputting data for power down, temperature and condensation information
GAS Outputting data related to the picture quality setting of SLOT
GAR Outputting data related to the picture quality (RGB1 of the Factory menu)
GPD Outputting data on PD information of Service Factory menu (past eight times)
GPS Outputting data related to SCREEN adjustment data
GSD Outputting TxD data on SD information of Service Factory menu
GWB Outputting data related to picture quality / white balance
GSS Outputting data on SETUP items of menu mode / Integrator menu
GSO Outputting data on OPTION items of menu mode / Integrator menu
GAJ:
Outputting data for electronic-control-adjustment values and drive-system-adjustment values
• Data are output according to the transmission order and size of the table below.
• This command is invalid in modes other than RS-232C Factory Adjustment mode.
Order
1 Setting mode of electric power upper limit value
2
Electric power upper limit value
3
(ABL)
4 Vsus adjustment value
5 Vofs adjustment value
6 V-SUS-B adjustment value
7 V-SUS-G adjustment value
8 Y-SUS-B adjustment value
9 Y-SUS-G adjustment value
(Note 1) : If data are output when the Reference mode is selected, the same data as the reference data are output as the offset data.
GPW
(Get Panel White balance)
• Data are output according to the transmission order and size of the table below.
• This command is invalid in modes other than the RS-232C Factory Adjustment mode.
Order
1 Panel color temperature mode
2
Gain of W/B adjustment value
3
Red
4
Gain of W/B adjustment value
5
Green
6
Gain of W/B adjustment value
7
Blue
8
Offset of W/B adjustment value
9
Red
10
Offset of W/B adjustment value
11
Green
12
Offset of W/B adjustment value
13
Blue
(Note 1) : If data are output when the Reference mode is selected, the same data as the reference data are output as the offset data.
5
6
Data Contents
(Reference data)
(Offset data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
(Reference data)
:
Outputting data related to the white-balance adjustment for the panel
Data Contents
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
(Reference data)
(Offset data)
6
7
Function
Size Remarks
3 byte AB* ( *: 0 to 3)
3 byte
3 byte (Note 1)
3 byte
3 byte
3 byte
3 byte
3 byte
3 byte
Size Remarks
3 byte PT* ( *: 0 to 3)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
3 byte
3 byte (Note 1)
PRO-1000HDI
7
8
A
B
C
D
E
F
145
8