Command; Rs232C Command - Pioneer PDP-435PG Service Manual

1

6.3 COMMAND

6.3.1 RS232C COMMAND

• The panel control items for the PDP-435P system can be controlled with the RS-232C commands by connecting a PC through the
A
GGF1475 special communication device when the Media Receiver is not connected with the PDP.
Note: The special communication device for the PDP-503P cannot be used with this unit, because the control lines within the MDR cable are
different.
Connection
B
MDR
C
D
E
F
48
1
2
Communication line:
Connect the system cable.
GGF1475 special
communication device
PDP-435PE
2
3
PC for control
Connect to the D-SUB 9-pin connector.
D-SUB 9-pin straight cable
3
4
4