Table of Contents
Advertisement
OPERATION
OPERATE UNIT
1. Start the engine.
2. Engage operator presence lever.
3. Pull the PTO switch to on position to
engage attachment.
4. Set throttle speed based on attachment
being operated and working conditions.
5. Rotate drive control grip to drive unit.
STOP UNIT
1. Push PTO knob down to off position.
2. Release operator presence lever.
3. Turn key to off position.
INSTALL MOWER ATTACHMENT
WARNING: AVOID INJURY.
Keep body parts away from
pinch points when installing and
removing attachments.
1. Stop engine, engage parking brake and
disengage PTO.
2. Place tractor support stand in down
position.
See Figure 14.
3. Press and hold attachment lever lock
against tractor frame.
4. Move attachment lever forward.
5. Release attachment lever lock and rotate
bow latch toward the tractor.
1. Attachment Lever
2. Attachment Lever Lock
3. Bow Latch
6. Insert mower attachment receiver into
tractor driveshaft. See Figure 15.
EN - 15
2
1
Figure 14
Figure 15
3
Advertisement
Table of Contents
