Setting The Flash - Concord Camera Concord Eye-Q 4363z User Manual

SETTING THE FLASH

A
AWB
fig. 1.1
How to set the flash:
Press /
Flash Mode
Auto Flash (Default)
A
Auto + Red-Eye
A
Flash ON
Flash off
Note:
• The flash needs to recharge after it is fired. If the Shutter button is pressed while the flash is
charging, the Flash Ready LED will blink. Please wait a few moments and press the Shutter button
again to take a picture.
• Some of the Scene Selection Modes will deactivate the flash setting. Please refer to p.20 for more
information.
A
3 M
28/45
A
A
AWB
AWB
repeatedly until the desired indicator appears on the LCD.
Description
The camera judges if a flash is required. If the environment is too dark,
the flash will fire.
Use this mode to significantly reduce the occurrence of "red-eye" in flash
A
photography. The camera will automatically detect when the flash is needed
and the flash will fire after a short delay.
Flash will fire in any lighting condition. The "red-eye" reduction function is
AWB
included also.
The flash will not fire in this mode. Please use this mode if you want to
capture the mood of the ambient lighting or to use the available light in
places where flash photography is prohibited, such as museums.
• To prevent blurry pictures in low light situations, hold the camera steady
when pressing the Shutter button or mount the camera on a tripod.
AWB
A
A
AWB
AWB
fig. 1.2
2
5
10
30
12
TAKING A PICTURE
3 M
A
AWB AWB
fig. 1.3
AWB
28/45
A
AWB