21. Connect the 2P connector form the SCREEN FARME to the 2P connector
of the machine.
22. Place wire harnesses on the left hand side of the machine in the wire
saddles and secure the excess cables in the LARGE WIRE SADDLE fitted
in step 15 with wire ties.
23. Carefully slide the SCAN UNIT out towards the front of machine and check
it does not come into contact with the wire harnesses fitted in the machine.
24. Install the SCREEN and tighten the securing screw in the top of the
SCREEN FRAME.
25. Install the rear machine cover.
26. Check machine operation and the MANUAL MASKING ACCESSORY for
correct operation.