Introduction; Description Of The Cooling Device; Machine Plate; General Instructions, Precautions And Safety Instructions - LINDR Green Line PYGMY PRO KITCHEN Instruction Manual

1. INTRODUCTION:

Thank you for choosing to purchase a LINDR
product.
2. DESCRIPTION OF THE COOLING
EQUIPMENT:
PYGMY PRO KITCHEN GREEN LINE
The luxury beer cooler PYGMY PRO KITCHEN
is designed for professional cooling, bottling
and serving of quality chilled beer in the home
environment. The sleek design makes this
cooler a modern addition to the home kitchen
or bar. The combination of stainless steel and
black tempered glass underlines its elegance
and original look.

3. MACHINE PLATE:

15
4. GENERAL INSTRUCTIONS, MEASURES
AND SAFETY INSTRUCTIONS:
When using, make sure to follow the basic
safety instructions given by the manufacturer
of such equipment. The cooling device is de-
signed for flow cooling of beverages. Any oth-
er use is considered unacceptable and there-
fore dangerous. The supplier is not liable for
damages caused by improper use.
DO NOT USE THE DEVICE FOR PURPOSES
OTHER THAN THOSE INTENDED BY THE MAN-
UFACTURER!
The devices meet safety protection IP21.
General safety rules. Please observe the fol-
lowing safety instructions.
The supplier is not liable for damage caused
by activities carried out on this device without
observing the following instructions!
ATTENTION:Children aged 15 or more and
persons with reduced physical, sensory or
mental capabilities or insufficient experience
and knowledge may only use the device when
supervised or instructed in safe use of the ap-
pliance and familiarised with potential dan-
gers.
ATTENTION: Children must not play with
the appliance. Keep all packaging material out
of reach of children (it contains plastic bag –
suffocation hazard).
ATTENTION: Cleaning and maintenance of
the appliance by the user must not be carried
out by unsupervised children.
ATTENTION: Before connecting the
main power supply, check that the voltage
and frequency match the information on the
device.
ATTENTION: Always make sure that the
socket you intend to plug the cooler into
meets the specifications on the machine plate
(voltage, frequency, input power).
ATTENTION: Before performing any oper-
ation on the device such as cleaning or main-
tenance, ALWAYS disconnect the device from
power supply.
ATTENTION: Never insert tools or other ob-
jects into the fan.
ATTENTION: Never touch electrical parts
with wet or damp hands.
ATTENTION: To ensure the performance of
the cooling unit, never block the air supply.
ATTENTION: Water temperature during
sanitation must not be higher than 25 °C!
ATTENTION: Always make sure that the
power socket you intend to plug the cooler
into is freely accessible so that the plug can be
pulled out immediately in case of emergency.
ATTENTION: When pulling the plug out of
the socket, hold the plug tightly and pull. Do
not pull on the power cord under any circum-
stances, as damage may occur.
ATTENTION: To turn the device off com-
pletely, unplug the appliance from the power
socket.