ICP DAS USA iSN-101 User Manual page 29

~aaM Read OEM module name
~aaO(data) Set module name
~aaRD Read response delay time in ms
~aaRDxx Set response delay time in ms, xx in hex, 00 ~ 1E
~AARS Read DIP switch
Response !AAdddd (rotary, DIP switch)
~aaSR Software reset
~aaTxx Set soft INIT timeout in s, xx in hex
~aa0 Read host watchdog status
~aa1 Clear host watchdog timeout status
~aa2 Read host watchdog setting
~aa3ett Set host watchdog setting
~aa4 Read power on and safe DO
Response !AAPPSS
~aa5PPSS Set power on and safe DO
*Note：DCON firmware must be version A103 or later with Terminal Resistor supports
open wire function. (for iSN-101 only)
iSN-101/104 User Manual
- 29 -