Table of Contents
Advertisement
This chapter provides LEDs information, and corrective actions for solving problem.
MAC address Date Rate
ADD1 ADD2
5.1 Network LED
State
No power or duplicate ID
LED is off
not completed.
CME-DN01 is connected to
Flashing
the network but something
Green LED
wrong with the network
configuration setting.
Online and connected.
Green LED
One or more connections
established
Flashing Red
Online but failed to
LED
establish connection.
Revision September 2017, 2006PDD23000003
125K
250K
500K
NET
MOD
SP
BAUD
CME-DN01
V+
Indication
Chapter 5 Troubleshooting
Empty
CAN-H
CAN-L
V-
pin
Corrective Actions
1.
Verify that the power supply of CME-DN01 is
connected and the power is applied to the
CME-DN01.
2.
Make sure one or more nodes are
communicating on the network.
3.
Make sure at least one other node on the
network is in operation at the same time and
data rate is the same as the CME-DN01.
1: Reserved
2: EV
3: GND
4: SG-
5: SG+
6: Reserved
7: Reserved
8: Reserved
5-1
Advertisement
Table of Contents
