Features - Delta DeviceNet CME-DN01 User Manual

Chapter 1 Preface| CME-DN01

1.3 Features

The communications adapter device acts as a gateway from DeviceNet network to
MODBUS network.
Install on the AC drives directly.
Defined as a DeviceNet Communications Device Profile 12 (0xC).
There are 8 I/O addresses used to control the length by setting. The I/O mapping
address can be set by the DeviceNet manage software system, such as RSNetWorx®
from Rockwell. By this way, user can monitor the VFD series by the ladder diagram,
such as RSLogix 500® from Rockwell, and send commands to VFD series.
No external power needed. Power is supplied via RS-485 that is connected to VFD
series. Eight pins RJ-45 cable, which is packed together with CME-DN01, is used to
connect RS-485 of VFD series to RS-485 of CME-DN01 for power. CME-DN01 starts
operation once the connection finished.
DeviceNet Group2 slave functionality includes:
Explicit connection
Polled connection
Object Model
1-2
Revision September 2017, 2006PDD23000003