Table of Contents
Advertisement
Twin Modulator
4.3. Broadband amplifi er
1
2
3
4
It features two signal input connectors, to
allow the mixing of the channels provided by
two systems. If only using one of the inputs, it is
recommended to load the unused input with a
load of 75 ohm, ref 4061.
TEST
(-30dB)
5
PWR
6
7
Output connector and a test socket (-30 dB) are
located in the upper part of the front panel.
1. RF output
2. Test socket (-30dB)
3. RF input
4. RF input
5. Powering BUS connectors
6. Status LED
7. Gain attenuator
The amplifi er is powered with 24 Vdc by means fo
a lead which is the same as that used to power the
rest of the system's modules.
12
Advertisement
Table of Contents
