4.3 Temperature Sensor
The LR1121 has a built-in temperature sensor which gives an indication of the internal device temperature.
4.3.1 GetTemp
The temperature measurement can be triggered using command GetTemp(...).
Table 4-7: GetTemp Command
Byte
Data from Host
Data to Host
Table 4-8: GetTemp Response
Byte
Data from Host
Data to Host
The temperature value is a function of an internal reference voltage (typ. 1.35V), and a typical temperature characteristic
(typ -1.7mV/°C), and can be approximated using the following formula:
Temperature degC
GetTemp
NOTE:
() uses XOSC mode to get the temperature, so if a TCXO is connected to the
SetTcxoMode
using
before calling
LR1121
User Manual
Rev 1.1
UM.LR1121.W.APP
Mar 2023
0
0x01
Stat1
0
0x00
Stat1
1000
--------------------------- -
~
25
+
Temp(10:0)/2047*1.35 - 0.7295
–
1.7mV/°C
GetTemp
().
www.semtech.com
1
0x1A
Stat2
1
0x00
Temp(15:8)
LR1121
2
0x00
Temp(7:0)
, it must be configured
40 of 130
Semtech
Proprietary & Confidential