Commands; Settxcw; Settxinfinitepreamble; Table 12-2: Settxcw Command - Semtech LR1121 User Manual

12.2 Commands

12.2.1 SetTxCw

Command SetTxCw (...) sets the device in TX continuous wave mode (unmodulated carrier).

Table 12-2: SetTxCw Command

Byte
Data from Host
Data to Host
This command immediately sets the device in TX CW mode. Therefore, the operating frequency and the PA configuration
commands (including the RF output power) have to be called prior to this command.

12.2.2 SetTxInfinitePreamble

Command SetTxInfinitePreamble(...) transmits an infinite preamble sequence.

Table 12-3: SetTxInfinitePreamble Command

Byte
Data from Host
Data to Host
This command immediately starts transmission of the infinite preamble sequence. Therefore, the operating frequency, the
PA configuration commands (including the RF output power) and the packet type have to be called prior to this command.
LR1121
User Manual Rev 1.1
UM.LR1121.W.APP Mar 2023
0
0x02
Stat1
0
0x02
Stat1
www.semtech.com
1
0x19
Stat2
1
0x1A
Stat2
120 of 130
Semtech
Proprietary & Confidential