Haier HCP-80 Operating Instructions Manual page 8

6.CO concentration acquisit
2
The new type 190 ℃ high temperature infrared (IR) sensor is based on the NDIR measurement
principle and adopts silicon MEMS emitter instead of conventional light source, and is able
complete more than 300 dry heat sterilization cycles. Its service life is up to 15 years.
7. Pollution control system
•There is a microbial high-efficiency filter is installed at the front end of the gas path, and the
gas will be fi ltered through it before entering the incubator to ensure the purity of CO
effi ciency fi lter is placed outside the electric cabinet for easy replacement;
•There is a stainless steel sintered fi lter element installed on the back of the working chamber to
ensure that the gas inside the incubator is fi ltered before penetrating into the chamber;
•Dry heat sterilization at 180 ℃ : Maintain the temperature of 180 ℃ for at least 1.5 hours. The
entire sterilization process takes only 12 hours from warming to cooling.
8.Humanized design
•Friendly touch-operated interface allows a sensitive response to finger movements with rubber
gloves;
•Announcement design, paperless offi ce message notepad function, and safety operation mode;
•The four corners of the liner is large arc-shaped, and the integrated stamping structure ensures
complete cleaning without dead spaces;
•Convenient drainage design;
•Integrated anti-skid shelf design; adjustable horizontal feet;
•Large capacity data storage with 15 years of data traceability.
We apology for the differences between the Haier CO
diagrams in the user manual due to product improvement. The contents of this manual are
subject to changes without notice.
incubator you received and the
2
6
; the high-
2