Haier HCP-80 Operating Instructions Manual page 12

Connection of the main power supply
•Before connecting the main power supply, ensure that the power matches the power requirements
indicated on the nameplate. The requirements of the power supply for the incubator are:
Power voltage: AC 220-240V~；
Voltage frequency: 50Hz±1Hz；
•The accessories of the incubator include a power cable for grounding. Plug the quick connector of
the power cable into the lower right interface (facing the incubator) of the electric cabinet on the back
of the incubator.
Make sure that the power cable is connected in place. The power cable connector has
Warning
a self-locking structure. The main power supply unit shall be well grounded. Make sure
that the power cable of the incubator is properly grounded after connection.
10