Table of Contents
Advertisement
Contents
1
2
3
4
5
6
7
8
9
11 Exploded View Drawings
User Responsibility/Warranty
This machine will perform in conformity with the
description contained in the instructions provided. This
machine must be checked periodically. Defective
equipment (including power cables) should not be used.
Parts that are broken, missing, obviously worn, distorted
or contaminated, should be replaced immediately. Should
such repair or replacement become necessary, it is
recommended that only genuine Elektra Beckum
replacement parts are used and that such repairs are
carried out by qualified persons approved by Elektra
Beckum or its representatives. Failure to comply relieves
Elektra Beckum from product liability. The aforementioned
also applies to all accessories offered for this machine.
This machine or any of its parts should not be altered or
changed from standard specifications. The user of this
machine shall have the sole responsibility for any
malfunction which results from improper use or
unauthorized modification from standard specifications,
faulty maintenance, damage or improper repair by anyone
other than qualified person approved by Elektra Beckum
or its representatives.
Please fill in the warranty registration card and send to
the address shown on it. Normal wearing parts and
consumables are not covered by the warranty.
Elektra Beckum reserves the right to change
specifications and design without prior notice and without
incurring obligation of any kind. Equipment referred to as
available or optional may be at extra cost.
1
Specifications
Dimensions (lxwxh)
Weight
Table height from floor
Throat capacity
Max. height of cut
length
width
Saw table
Blade speed
Motor capacity
Motor 1~ 230 V
Motor 3~ 400 V
Noise information according to DIN 45635
Sound power level L
Workplace related noise
emission value:
1.1 Scope Of Delivery
Band Saw BAS 600, preassembled,
complete with - general purpose band saw blade
- grey iron table
- rip fence
- table insert
- operating instructions
1.2 Specified Conditions Of Use
This Band Saw model BAS 600 is designed for sawing
wood. Sawing or cutting any other material is not
permitted.
Prior to sawing check each workpiece for possible flaws,
inclusions of foreign matter (e.g. nails) etc.
This band saw can be used for rip and cross cutting
timber, provided a suitable saw blade is installed for the
job on hand.
Cut round stock only with the aid of suitable jigs and
fixtures.
The specified conditions of use entail the observation of
all operating, service and maintenance instructions given
by the manufacturer, as well as the close observation of
all safety information given in the operating instructions.
This band saw should only be set up, operated and
serviced by persons familiar with such work and who are
aware of the risks of such work.
All relevant safety regulation for the operation of circular
saws, as well as all generally accepted industrial medicine
standards and safety regulations have to be observed.
10
830x845x1860 mm
160 kg
945 mm
440 mm
275 mm
3380 mm
6 - 25 mm
tilts from 90° through 45°
410 - 1025 m/min,
steplessly adjustable
input P
1.5 kW output P
1
input P
1.5 kW output P
1
:
idlingunder load
WA
85 dB(A)
75 dB(A)
ENG
1.1 kW
2
1.1 kW
2
90 dB(A)
82 dB(A)
Advertisement
Table of Contents
