Wire-Connecting To Network - Philips S Line 37BDL3050S User Manual

37BDL3050S
4.6.

Wire-connecting to Network

INTERNET
ROUTER
[RJ-45]
[RJ-45]
PC
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [ ] HOME button on the remote control, then select .
Setup
4. Select , then press [ ] button.
Connect to network
5. Wait until this display finds the network connection.
6. If the "End User License Agreement" window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
15