Philips S Line 37BDL3050S User Manual page 43

Information OSD
Set the period of time the information OSD display on the
upper left corner of the screen. The information OSD will
display when input source and signal are changed.
The options are {Off, 1 - 60} seconds.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
• {Off} – Both static Philips logo and Android boot
animation will not be shown.
• {On} – Default value. Both Philips logo and Android boot
animation will be shown.
• {User} – Static Philips logo will not be shown, only user-
selected boot animation will be shown in Android
settings.
Note: Logo will not be rotated even thought rotation setting
is set.
Monitor ID
Set the ID number for controlling the display via the RS232
connection. Each display must have a unique ID number
when multiple sets of the display are connected. Monitor ID
number range is between 1 and 255.
• {Monitor ID} set range in {1-255}. The default setting is 1.
• {Monitor group} set range in {1-254}. The default setting
is 1.
Heat Status
Current thermal status.
Monitor information
Shows information about your display, including model
name, SW version, serial number, and operation hours.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
HDMI version
Set the HDMI version to 1.4 or 2.0.
Note: 1. HDMI input source only.
2. If timing setting to 4K60Hz the screen display
abnormal, please set the HDMI version to 1.4.
Configuration 2 reset
Reset all settings in Configuration 2 menu to factory preset
values.
7.2.6. Advanced Option menu
N/A
0
FBXX.XX
IR control
Select the operation mode of the remote control when
multiple displays are connected via RS232 connection.
• {Unlock} - All displays can be operated normally by the
remote control unit.
• {Primary} - Designate this display as the primary display
for remote control operation. Only this display can be
operated by the remote control. (In primary mode, IR key
will always be processed regardless of the monitor ID/
group settings).
• {Secondary} - Designate this display as the secondary
display. This display cannot be operated by the remote
control, and will only receive the control signal from the
primary display via RS232 connection.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR &VOL} - Lock the remote control
function of this display. To unlock, press and hold the
INFO button on the remote control for 6 (six) seconds.
Power LED light
Choose to set power indication LED on or off.
Choose {On} for normal use.
Keyboard control
Choose to enable or disable the display keyboard (control
buttons) function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR & VOL} - Disable the keyboard
function.
NOTE: "Keyboard Control Lock Mode" This function
completely disables the access to all Keyboard Control
functions. To enable or disable the keyboard control lock,
press both [VOL+ ] and [UP ] buttons and hold down
continuously more than 3 seconds.
Tiling
Create a single large-screen matrix (video wall) that consists
of up to 150 sets of the display (up to 10-sets on the vertical
and 15-sets on the horizontal sides). This function requires
daisy-chain connection.
• Switch on Delay: Set the power-on delaying time (in
seconds). Default option {Auto} allows a sequential
powering-on for each display by monitor ID when
multiple displays are connected. The options are: {Off,
Auto, 2-255}.
31
37BDL3050S