Ir Pass-Through Connection; Wire-Connecting To Network - Philips 75BDL4003H User Manual

4.5.

IR Pass-through Connection

4.6.

Wire-connecting to Network

PC
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [ ] HOME button on the remote control, then select
Connect to network
4. Select
5. Wait until this display finds the network connection.
6. If the "End User License Agreement" window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
[IR OUT]
Remote Control
INTERNET
ROUTER
[RJ-45]
, then press [ ] button.
Multimedia Player
[IR IN]
[RJ-45]
Setup
.
29
75BDL4003H