Philips S Line 37BDL3050S User Manual page 41

Gamma selection
Select a display gamma. It refers to the brightness
performance curve of signal input. Choose from {Native} /
{2.2} / {2.4} / {s gamma} / {D-image}.
NOTE: VIDEO source only. sRGB picture mode is standard and
cannot be changed.
Color temperature
Adjust the color temperature.
The image becomes reddish as the color temperature
decreases, and becomes bluish as the color temperature
increases.
NOTE: VIDEO source only.
Color Control
The color levels of red, green, and blue can be adjusted by
the color bars.
R: Red gain, G: Green gain, B: Blue gain.
Smart power
Control of lower power consumption based on brightness
setting.
• {OFF}: no adaptation
• {MEDIUM}: 80% of power consumption relative to current
settings
• {HIGH}: 65% of power consumption relative to current
settings
Overscan
If you encounter problems with over scanning, you can
change display area of the image.
• {ON}: Display 95% of the total image area.
• {OFF}: Display 100% of the total image area.
NOTE: VIDEO source only.
Picture reset
Reset all settings in the Picture menu.
Select "RESET" to restore factory preset data.
Press "CANCEL" button to cancel and then return to the
previous menu.
7.2.2. Screen menu
H position
Control Horizontal Image position within the display area of
the LCD.
Press + button to move screen to right.
Press - button to move screen to left.
NOTE: VGA input only.
V position
Control Vertical Image position within the display area of the
LCD.
Press + button to move screen to up.
Press - button to move screen to down.
NOTE: VGA input only.
Clock
Press + button to expand the width of the image on the
screen to the right.
Press - button to narrow the width of the image on the
screen to the left.
NOTE: VGA input only.
Clock Phase
Improves focus, clarity and image stability by increasing or
decreasing this setting.
NOTE: VGA input only.
Auto adjust
Press "Set" to detect and adjust H position, V position, Clock,
Phase automatically.
NOTE: VGA input only.
Screen reset
Reset all settings in the Screen menu to factory preset values.
7.2.3. Audio menu
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust the volume.
Maximum volume
Adjust limitation for the maximum volume setting.
29
37BDL3050S