Philips S Line 37BDL3050S User Manual page 45

OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power RCU Power
Save Button Off
Mode 1 DC OFF
Mode 2 DC OFF when signal is back,
system wake up
Mode 3 Backlight when signal is back,
OFF system wake up
Mode 4 Backlight Backlight always on,
OFF show no signal
Following table is the action for Android board with different
power mode.
Power mode Mode 1, Mode 2
DC off System shutdown
DC on System boot up
Advanced option reset
Reset all settings except {Date and Time} in the advanced
option menu to factory preset values.
No Signal WOL Android
(ARM)
DC OFF V ARM off
V ARM off
X ARM on
X ARM on
Mode 3, Mode 4
1. Media Player, Browser, PDF
Player and SmartCMS will
close.
2. Android system goes to
default black launcher.
Android system reboot. If
Logo settings is off, system
directly turn backlight on
without rebooting.
33
37BDL3050S