Philips S Line 37BDL3050S User Manual page 42

37BDL3050S
Minimum Volume
Adjust limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Audio Source
Select the audio input source.
{Analog}: audio from audio input.
{Digital}: audio from HDMI/DVI audio.
Audio reset
Reset all settings in the Audio menu to factory preset values.
Audio Out Sync
Line out volume sync with internal speaker Volume.
{On}: Enable the function and gray out Audio Out (line out)
Volume.
{Off}: Disable the function.
Speaker Setting
Turn internal speaker {On}/{Off}.
7.2.4. Configuration 1 menu
Switch on state
Select the display status when you connect the power cord
next time.
• {Power off} - The display will remain off when the power
cord is connected.
• {Forced on} - The display will turn on when the power
cord is connected.
• {Last status} - The display will return to the previous
power status (on/off/standby mode) when the power
cord is connected.
Panel saving
Choose to enable the panel saving functions and thus reduce
the risk of image persistence or ghost imaging.
• {Brightness} - Select {On} and the image brightness will
reduce to an appropriate level. The Brightness setting in
the Picture menu cannot be changed when this setting is
enabled.
• {Pixel Shift} - Select the time interval ({Auto}, {10-900}
seconds, {Off}) for display to slightly expand the image
size and shift the position of pixels in four directions (up,
down, left and right). Activating pixel shift will disable H
position, V position and Zoom mode in Screen menu.
Note: Video source only.
RS232 routing
Select RS232 routing path
• {RS232} – RS232 is routed from 2.5 mm phone jack
• {LAN->RS232} – RS232 is routed from RJ45
Boot on source
Choose to select a source when booting up.
• {Input} – Select input source when booting up.
• {Playlist} – Select playlist index for MediaPlayer, Browser,
PDF Player. 0 indicates there is no playlist.
WOL (Wake on LAN)
Allow the display to be turned on by a network message.
Note: This function only works in power mode 1 and mode 2.
Light sensor
Choose to turn on or off the light sensor function of CRD41.
Human sensor
Choose to turn on or off the human sensor function of
CRD41.
Configuration 1 reset
Reset all settings in Configuration 1 menu to factory preset
values.
Factory Reset
Reset all customized settings in Picture, Screen, Audio,
Configuration 1, Configuration 2 and Advanced Option to
the factory default values.
7.2.5. Configuration 2 menu
OSD turn off
Set the period of time the OSD (on-screen display) menu
stays on the screen.
The options are {Off, 5 - 120} seconds. {Off} does not
disappear automatically.
OSD H position
Adjust the horizontal position of the OSD menu.
OSD V position
Adjust the vertical position of the OSD menu.
30