Hyundai Santa Cruz Owner's Manual page 559

Type B
1. Raise the wiper arm.
2. Lift up the wiper blade clip (1). Then
pull down the blade assembly (2) and
remove it.
3. Install the new blade assembly in the
reverse order of removal.
4. Return the wiper arm on the
windshield.
CAUTION
If the wiper arm receives too much
force while pulling the blade, the center
part may be damaged.
CAUTION
• The wiper could not operate for
approx. 10 seconds when the wiper
is operated without washer fluid or
the blades are frozen. This is not a
malfunction, it is a wiper protection
OTM090039 OTM090039
system activated by motor overload
circuit within the wiper motor.
• The front windshield should be
cleaned with water hose and wiped
with clean towel with wiper blades
raised up. Also, the wiper blades
should be wiped clean when the
grease or wax is applied to the
blades.
OTM090040 OTM090040
OTM090041 OTM090041
09
9-31