Hyundai Santa Cruz Owner's Manual page 180

1. Programming HomeLink
The following steps show how to
program HomeLink. If you have any
questions or are having difficulty
programming your HomeLink buttons,
refer to the HomeLink website or call the
HomeLink customer support toll-free
number. Do this before going back to the
dealer who sold you the car.
• Visit the HomeLink website at: www.
homelink.com. Then at the top of the
page, choose your vehicle make. Then
watch the You Tube video, and/or
access additional website information.
• If you choose to access the website
via your cell phone, scan the QR code.
• Or call HomeLink customer support
at 1-800-355-3515 (Please have the
vehicle make/model and the opener
device make/model readily available.)
1) Programming Preparation
®
1. When programming a garage door
2. It is recommended that a new battery
3. Place the ignition switch to the ACC
opener, it is advised to park the
vehicle outside of the garage.
be placed in the handheld transmitter
of the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
(Accessory) position for programming
of HomeLink.
05
ODN8H050340N ODN8H050340N
5-45