Hyundai Santa Cruz Owner's Manual page 424

Driver Assistance System
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator blinks.
ONE1071084N ONE1071084N
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.
7-72
• If you want to drive below the speed
limit, adjust the Offset under '0' or
use the – switch on the steering
wheel to lower the set speed.
• Even after changing the set speed
according to the speed limit of the
road, the vehicle can still be driven
over the speed limit. If necessary,
depress the brake pedal to reduce
your driving speed.
ONX4OB071036 ONX4OB071036
• If the speed limit of the road is under
20 mph (30 km/h), the set speed
change function will not work.
• Intelligent Speed Limit Assist
operates using the speed unit in the
instrument cluster set by the driver.
If the speed unit is set to a unit other
than the speed unit used in your
country, Intelligent Speed Limit
Assist may not operate properly.
• For more details on Manual Speed
Limit Assist operation, refer to
"Manual Speed Limit Assist (MSLA)"
ONE1071085N ONE1071085N
section in this chapter.
• For more details on Smart Cruise
Control operation, refer to "Smart
Cruise Control (SCC)" section in this
chapter.
WARNING
Information