Related Manuals for Adastra S460-WIFI
Summary of Contents for Adastra S460-WIFI
- Page 1 S460-WIFI Item ref: 103.146UK User Manual Dual Stereo Internet Streaming Amplifier Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
-
Page 2: Front Panel
Bluetooth and WiFi signals. The S460-WIFI amplifier can also play mp3 tracks stored on a USB pen drive, which should be inserted into the USB port on the front panel (3). Note: this USB port is not suitable for charging smart phones. -
Page 3: Operation
If an external playback device is to be used, connect this to the AUX IN sockets on the rear panel (11). The S460-WIFI delivers up to 30W per channel at 8Ω to the speaker outputs on the rear panel (17, 18). - Page 4 For android devices, download the Legacy Player apk from the Google Play Store. If the S460-WIFI is connected to the local router by wired network lead, you can skip the WiFi setup. If your WiFi router has a WPS feature, pressing this and then pressing the INPUT (WPS) button (8) on the S460-WIFI media player can link the amplifier to your local WiFi network, making setup easier.
- Page 5 “LinkPlay_XXXX”, as shown opposite. In the case of the S460-WIFI, the correct ID to search for will be S460-WIFI_ XXXX where XXXX is the ID number of the amplifier.
- Page 6 WiFi settings menu back to the WiiM Legacy Player app and the next screen will ask to connect the S460-WIFI to the local WiFi network. The Speaker Network screen will normally default to the WiFi that the smart phone was connected to before, but there is an option to Change Wi-Fi if a different one is preferred.
-
Page 7: Device List
Once connected, a notification will appear to confirm this, showing the signal strength. Select Next to see the Name Device page, which enables the user to give the S460-WIFI a label to describe its audio zone. Select a name (or create a custom name). -
Page 8: Browse Menu
Locally stored tracks can be listed by Song, Artist, Album or Folder for convenience. The smart phone must remain connected to the same WiFI as the S460-WIFI to maintain playback. Going back to the main Browse list, some of the listed Music services require a subscription and may be added or removed from the list as required via the icon at the bottom of the list. - Page 9 To change the audio stream or output level via the smart phone, it is necessary to connect the smart phone to the local WiFi and open the Legacy Player app for control. When the S460-WIFI is powered down, the audio stream may need to be re-set when powered on again.
Need help?
Do you have a question about the S460-WIFI and is the answer not in the manual?
Questions and answers