Table of Contents
Advertisement
Communication Speed Setting
The communication speed is factory-adjusted to 38.4Kpbs.
In case it does not match the communication speed of multi-purpose camera AK-HC900P,
the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board
and adjust it to the communication speed of the camera.
Remove the
screw and open
the bottom
plate, then DIP
SW can be seen
in there.
ON
1 2 3 4
5 6 7 8
SW3
Change the
communication report
by the combination of
SW3 No.1 and No.2 on
ROP CPU board.
SW5 SW4 SW3
ON
125Kbit/Sec
1 2 3 4
ON
38.4Kbit/Sec
1 2 3 4
ON
9600Kbit/Sec
1 2 3 4
17
Advertisement
Table of Contents
