Related Manuals for Mi-Light MiBOXER FUT041
Summary of Contents for Mi-Light MiBOXER FUT041
- Page 1 Subordinate New Brand Single Color LED Strip Controller (433MHz ) Model No.: FUT041...
- Page 2 Features This controller adopt the widely used 433MHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. Widely used on the controlling of hotel lighting and home lighting. Dimmable 433MHz RF wireless control transmission technology Remote control Control distance 30m...
- Page 3 Parameters Remote Control Working Voltage: 3V(2*AAA Battery) Transmitting Power: <10mW Working Temp.: -20~60°C Modulation Method: ASK RF: 433MHz Control Distance: 30m Standby Power: 20uA Strip Controller Input Voltage: DC12V~24V RF: 433MHz Output: 12A/Channel Control Distance: 30m Total Output: Max 12A Output Connection: Common anode Working Temp.: -20~60°C Products Key Diagram...
- Page 4 Connect diagram Pilot lamp instruction: Always lighting means working normally; Flash means receiving remote signal. Input: DC12V/24V Single Color LED Strip Controller (433MHz) Model No.: FUT041 Working Temp.: -20~60°C Input Voltage: DC12V~24V RF: 433MHz Output: 12A/Channel Controlling Distance: 30m Total Output: Max 12A Made in China Note Factory setting is one remote control one receiver.
- Page 5 Linking the controller Power Link/Unlink Supply button controller Switch off the light, after 10 When the light on, short press seconds switch on again. " " 1 time within 3 seconds. The light blink 3 times slowly means the linking is done successfully. If the light not blink slowly, the linking failed, Pls switch off the light again, and follow the above steps again.
- Page 6 Attention 1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be damage. 2. Please don’t connect wires with power on. Please turn on again only when it is in right connection and no short circuit.
Need help?
Do you have a question about the MiBOXER FUT041 and is the answer not in the manual?
Questions and answers