Mi-Light MiBoxer ML5 Instructions Manual

ML5 Matter Over Wifi 5 in 1 LED controller
Product Features
· Certified Matter Over wifi, Matter standard protocol, support communicating for different platforms
· Wide compatibility, communicating with different ecosystems from different manufacturers or brands
· Support to create various forecast scenes mode, select suitable lighting performance based on
different requirements
· One controller max paired with 12 remotes ( control distance is 30m)
· Built-in 18 dynamic modes like jumping, gradually change ( only enjoy it from remote control)
· Auto transmitting: Auto transmitting signal to another devices and extend unlimited control distance
· Auto synchronization: The same dynamic mode can be synchronized and maintain all modes in the
same status.
· Support DND mode, usually used in power failure area to save power.
· Support multi platforms like Apple Home Kit、Amazon Alexa、Google Home、SmartThings、TUYA
Smart
124mm
Matter Devices
You can add Matter over wifi device into any Matter ecosystems to do smart control simply.
Hereby we explain configuration steps for Matter devices from Tuya Smart APP, Amazon Alexa,
Google Home、SmartThings
Attention:
· Matter configuration code is only used to add device into the first platform, you need to create
new configuration code and share this code in initial platform if you want to use it in the second
platform. Cross platform only can share max 4 codes.
· Ensure that your phone connect with Matter devices under stable 2.4GHZ wifi network and the
network work normally while we do configuration.
· The rounter must turn on IPv6 function
(Pairing code instruction)
0.25K 1-CH
1K 2-CH
4K 3-CH
38mm
8K 4-CH
16K 5-CH
Link Frequency Mode
Model: ML5
23mm