Omntec Proteus Series Programming Manual page 21

OEL8000III Series
Press the PRINT SYSTEM SETTINGS button. This does a print-out of your system settings.
Press the RELAY SETTINGS button.
Program Relay Modes:
Relay Modes: Each relay can be programmed to operate in one of three modes: Relay mode, light
mode, and horn mode:
a) Relay Mode: Standard relay
b) Light Mode: Use the relay to turn on a light. Blinks on test mode.
c) Horn Mode: Use the relay to turn on a horn. Sounds on test. Can be acknowledged.
OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779
Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com
File Name: DI00014 DI00015 DI00020-5 rev2315.docx 21 of 26 Rev Date: 4-18-2023
PROTEUS
WEB PAGE PROGRAMMING MANUAL
®