Configuration Options; Ultra Riser Cards; Storage Protocols; Power Supply Options - Supermicro SuperServer SYS-610U-TNR User Manual

Configuration Options

Ultra Riser Cards

Ultra Riser cards provide network connections and other capabilities. The customer must
choose one when purchasing the system.
LAN Ports Part Number
No NIC AOC-URG4N4
Two 10GBaseT AOC-URG4N4-i2XT
Four 10GBaseT
AOC-URG4N4-i4XTS
(two SFP+)
Two 25GbE AOC-URG4N4-m2TS

Storage Protocols

The storage drive bays can support SATA, SAS, and NVMe in any combination. To enable
SAS and NVMe, additional hardware is required. Once the supporting hardware is installed
for a selection of bays, drives of any storage protocol type can be inserted.
SATA – The default configuration supports up to four SATA drives.
SAS – An add-on controller card and cables can support up to four SAS drives.
NVMe – The motherboard supports up to four NVMe drives. Additional cables are required.

Power Supply Options

Watts
1200
1600
2000
1300 DC
Ultra Riser Networking Options
Description
PCIe 4.0 x16 (Internal), four NVMe ports
Two RJ45, Intel X710-AT2,
PCIe 4.0 x16 (Internal), four NVMe ports
Two RJ45 and two SFP+, Intel X710-TM4,
PCIe 4.0 x16 (Internal), four NVMe ports
Two SFP28, Mellanox ConnectX-6,
PCIe 4.0 x16 (Internal), four NVMe ports
Power Supply Module Options
Part Number
PWS-1K22A-1R (default)
PWS-1K62A-1R
PWS-2K08A-1R
PWS-1K30D-1R
10
Chapter 1: Introduction
80Plus Level
Titanium
Titanium
Titanium
Not applicable