Error Report; System Information - Panasonic WJ-HD500A Operating Instructions Manual

Error Report

There are 100 error records stored in chronological order in
10 pages of tables.
1. Move the cursor to ERROR REPORT in the SYSTEM
SETUP menu by pressing the C or D button, then
press the SET button.
The ERROR REPORT table appears on the monitor
screen as shown below.
9-4 ERROR REPORT
NO DATE
100 SEP12.99
099 SEP12.99
098 SEP12.99
097 SEP12.99
096 SEP12.99
095 SEP12.99
094 SEP12.99
093 SEP12.99
092 SEP12.99
091 SEP12.99
2. Pressing the C or D button will move the cursor to up
or down and select the next or previous page of the
tables.
3. To clear the all records, press the + and - buttons
simultaneously for two seconds or more.
4. To return to the previous SYSTEM SETUP menu, press
the SETUP/ESC button.
75
TIME CAUSE
23:59:59 THERMAL 6
22:15:40 POWER RECOVER
21:00:07 POWER LOSS
17:33:05 ALTERED
7:23:11 ERROR
6:59:44 WARNING 1-5
3:15:28 HDD EMPTY
0:01:28 WARNING 1-5
3:15:28 HDD EMPTY
0:01:28 POWER LOSS
(TOTAL 100)

System Information

The table indicates the version of the hardware and soft-
ware.
1. Move the cursor to SYSTEM INFORMATION in the SYS-
TEM SETUP menu by pressing the C or D button, then
press the SET button.
The SYSTEM INFORMATION table appears on the mon-
itor screen.
9-5 SYSTEM INFORMATION
HARDWARE VERSION
SOFTWARE VERSION
Note: "VMD" will be displayed when the optional
motion detector board is installed in the disk
recorder.
2. To return to the previous SYSTEM SETUP menu, press
the SETUP/ESC button.
MAIN 1.00
VMD 1.00
MAIN 1.00
N/W 1.00